Tariffa doganale Decisioni D-Memoranda Misure di difesa commerciale Requisiti PGA Regimi sanzionatori

Ruling C-2015-009670

active

&&Based on the information and sample provided, Trimont part # 83500-TBG-A210-UB (face material: SW294B) is used in the manufacture of automotive door liners. The sample submitted consists of a face material cut to an irregular shape (approximately 90 cm by 20-25 cm; “made-up”) consisting of a thinner material (approximately 2 mm thick) stitched length wise to a much narrower piece of thicker material (approximately 4.0 mm thick). The three laminated layers that have been bonded together include a dark beige woven polyester fabric, beige polyurethane plastic and a white knitted nylon fabric. This sample can, without fracturing, be bent manually around a cylinder of a diameter of 7mm, at a temperature between 15°C and 30°C.

Classificazione SA

6307.90.99.90

Motivazione CBSA

&&Trimont part # 83500-TBG-A210-UB (face material: SW294B) is specifically provided for in Chapter 63 as a “made up article”. Being a cellular plastic combined on both faces with textile fabric excludes it from Chapter 39, according to the “plastics and textile combinations” section of those chapter notes. It began as a laminated textile fabric of Heading 59.03, and was then made up according to Legal Note 7(a) and (f) to Section XI, i.e. cut into an irregular shape (other than into squares or rectangles) and assembled by sewing (visible stitching). This product meets the terms of heading 63.07 which provides for in part; other made up textile articles.

Decisioni correlate

Pronto a classificare più velocemente?

CustomsLogIQ utilizza questi dati tariffari per la classificazione AI. La provi gratuitamente.

Provi CustomsLogIQ gratuitamente