HS 4804: Uncoated kraft paper and paperboard, in rolls or sheets,...

Explanatory Notes

Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading4802or4803 For the definition of the term ‘kraft paper and paperboard’, see note 6 to this chapter. Kraft paper and kraft paperboard have great mechanical strength. They usually contain no fillers and are sized to a fairly high degree, are almost always opaque, in most cases machine-glazed (i.e., calendered on...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Kraftliner See subheading note 1 to this chapter and the corresponding HS Subheading Explanatory Notes.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Sack kraft paper See subheading note 2 to this chapter and the corresponding HS Subheading Explanatory Notes.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Kraft electro-technical insulating paper This subheading includes capacitor paper and cable paper. Capacitor paper is thin paper used in the dielectric of electrical capacitors. The fibres used to make this paper undergo considerable refining to reduce the porosity of the sheet to a minimum, and all foreign bodies (especially metal) are carefully removed. Cable paper is intended for insulating...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Saturating kraft Paper and paperboard of this type consist mainly of wood fibres, weigh more than 185 g but less than 225 g per m2and are generally supplied in rolls in widths of more than 125 cm but less than 165 cm. They have a porosity index, measured with a Gurley porosimeter in accordance with the standard laid down by the Technical Association of the Pulp and Paper Industry (TAPPI), of...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Chapter 48 Notes (19)

1. 1. For the purposes of this Chapter, except where the context otherwise requires, a reference to "paper" includes references to paperboard (irrespective of thickness or weight per m²).

2. 2. This Chapter does not cover: • (a) Articles of Chapter 30; • (b) Stamping foils of heading 32.12; • (c) Perfumed papers or papers impregnated or coated with cosmetics (Chapter 33); • (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 34.01), or with polishes, creams or similar preparations (heading 34.05); • (e) Sensitised paper or paperboard of headings 37.01 to 37.04; • (f) Paper impregnated with diagnostic or laboratory reagents (heading...

3. 3. Subject to the provisions of Note 7, headings 48.01 to 48.05 include paper and paperboard which have been subjected to calendering, super-calendering, glazing or similar finishing, false water-marking or surface sizing, and also paper, paperboard, cellulose wadding and webs of cellulose fibres, coloured or marbled throughout the mass by any method. Except where heading 48.03 otherwise requires, these headings do not apply to paper, paperboard, cellulose wadding or webs of cellulose...

4. 4. In this Chapter the expression "newsprint" means uncoated paper of a kind used for the printing of newspapers, of which not less than 50 % by weight of the total fibre content consists of wood fibres obtained by a mechanical or chemi-mechanical process, unsized or very lightly sized, having a surface roughness Parker Print Surf (1 MPa) on each side exceeding 2.5 micrometres (microns), weighing not less than 40 g/m² and not more than 65 g/m², and applies only to paper: • (a) in strips or...

5. 5. For the purposes of heading 48.02, the expressions "paper and paperboard, of a kind used for writing, printing or other graphic purposes" and "non perforated punch-cards and punch tape paper" mean paper and paperboard made mainly from bleached pulp or from pulp obtained by a mechanical or chemi-mechanical process and satisfying any of the following criteria: (A) For paper or paperboard weighing not more than 150 g/m²: • (a) containing 10% or more of fibres obtained by a mechanical or...

6. 6. In this Chapter "kraft paper and paperboard" means paper and paperboard of which not less than 80% by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes.

7. 7. Except where the terms of the headings otherwise require, paper, paperboard, cellulose wadding and webs of cellulose fibres answering to a description in two or more of the headings 48.01 to 48.11 are to be classified under that one of such headings which occurs last in numerical order in the Nomenclature.

8. 8. Headings 48.03 to 48.09 apply only to paper, paperboard, cellulose wadding and webs of cellulose fibres: • (a) in strips or rolls of a width exceeding 36 cm; or • (b) in rectangular (including square) sheets with one side exceeding 36 cm and the other side exceeding 15 cm in the unfolded state.

9. 9. For the purpose of heading 48.14, the expression "wallpaper and similar wall coverings" applies only to: • (a) Paper in rolls, of a width of not less than 45 cm and not more than 160 cm, suitable for wall or ceiling decoration: (i) Grained, embossed, surface-coloured, design-printed or otherwise surface-decorated (for example, with textile flock), whether or not coated or covered with transparent protective plastics; (ii) With an uneven surface resulting from the incorporation of ...

10. 10. Heading 48.20 does not cover loose sheets or cards, cut to size, whether or not printed, embossed or perforated.

11. 11. Heading 48.23 applies, inter alia , to perforated paper or paperboard cards for Jacquard or similar machines and paper lace.

12. 12. Except for the goods of heading 48.14 or 48.21, paper, paperboard, cellulose wadding and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49. Subheading Notes.

13. 1. For the purpose of subheadings 4804.11 and 4804.19, "kraftliner" means machine-finished or machine-glazed paper and paperboard, of which not less than 80% by weight of the total fibre content consists of wood fibres obtained by the chemical sulphate or soda processes, in rolls, weighing more than 115 g/m² and having a minimum Mullen bursting strength as indicated in the following table or the linearly interpolated or extrapolated equivalent for any other weight. [TABLE] Weight...

14. 2. For the purpose of subheadings 4804.21 and 4804.29, "sack kraft paper" means machine-finished paper, of which not less than 80% by weight of the total fibre content consists of fibres obtained by the chemical sulphate or soda processes, in rolls, weighing not less than 60 g/m² but not more than 115 g/m² and meeting one of the following sets of specifications: • (a) Having a Mullen burst index of not less than 3.7 kPa.m²/g and a stretch factor of more than 4.5% in the cross direction...

15. 3. For the purposes of subheading 4805.11, "semi-chemical fluting paper" means paper, in rolls, of which not less than 65% by weight of the total fibre content consists of unbleached hardwood fibres obtained by a combination of mechanical and chemical pulping processes, and having a CMT 30 (Corrugated Medium Test with 30 minutes of conditioning) crush resistance exceeding 1.8 newtons/g/m² at 50% relative humidity, at 23°C.

16. 4. Subheading 4805.12 covers paper, in rolls, made mainly of straw pulp obtained by a combination of mechanical and chemical pulping processes, weighing 130 g/m² or more, and having a CMT 30 (Corrugated Medium Test with 30 minutes of conditioning) crush resistance exceeding 1.4 newtons/g/m² at 50% relative humidity, at 23°C.

17. 5. Subheadings 4805.24 and 4805.25 cover paper and paperboard made wholly or mainly of pulp of recovered (waste and scrap) paper or paperboard. Testliner may also have a surface layer of dyed paper or of paper made of bleached or unbleached non-recovered pulp. These products have a Mullen burst index of not less than 2 kPa.m²/g.

18. 6. For the purpose of subheading 4805.30 "sulphite wrapping paper" means machine-glazed paper, of which more than 40% by weight of the total fibre content consists of wood fibres obtained by the chemical sulphite process, having an ash content not exceeding 8% and having a Mullen burst index of not less than 1.47 kPa.m²/g.

19. 7. For the purpose of subheading 4810.22, "light-weight coated paper" means paper, coated on both sides, of a total weight not exceeding 72 g/m², with a coating weight not exceeding 15 g/m² per side, on a base of which not less than 50% by weight of the total fibre content consists of wood fibres obtained by a mechanical process.

Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading 48.02 or 48.03.

Subheadings

Explanatory Notes

Ready to classify faster?