HS 8414: Air or vacuum pumps, air or other gas compressors and...

الملاحظات التفسيرية

Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters For the purposes of this heading, pumps and compressors also include motor pumps, turbopumps, motor compressors and turbo-compressors.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Other This subheading includes liquid-ring vacuum pumps and membrane vacuum pumps.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Hand- or foot-operated air pumps Only those pumps which are hand- or foot-operated, i.e., operated solely by human effort, as described in the HS Explanatory Note to heading 8414 , (A), fall in these subheadings. They must be designed, in particular, for the inflation of pneumatic tyres (for example, for cycles, motor vehicles, etc.) and similar goods, for example, air mattresses, air cushions...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Fans Only those goods displaying the characteristics described in the HS Explanatory Note to heading 8414 , (B), and complying with the following conditions are considered to be fans for the purposes of these subheadings: 1. the air or gas pressure must not exceed 2 bar; 2. they must incorporate only one rotating surface (one stage). Air compressors not satisfying the above conditions are...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Centrifugal fans Centrifugal fans are those in which air or other gas to be moved is taken in axially and discharged radially.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Turbo-compressors In a turbo-compressor, the vane wheel shaft is driven by an external motor and the air or the other gas to be pumped is set in motion by the vane wheel. Turbo-compressors may be single-stage or multi-stage, axial or radial. Simple two-stage compressors are used, for example, in vacuum cleaners.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Single-stage This subheading also includes exhaust-gas turbochargers for internal-combustion piston engines, where they are used to compress the atmospheric air needed for combustion in order to increase power output. They are single-stage air turbo- compressors (blowers) used to generate an overpressure of more than 2 bar and are driven by an exhaust-gas turbine installed adjacent to the...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Parts This subheading also includes parts of exhaust-gas turbochargers for internal combustion engines. However, parts of the exhaust-gas turbine used with exhaust-gas turbochargers are classified in heading 8411 as parts of a gas turbine without combustion chamber.

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

[14]On February 11, 2021, BBB stated that in its argument, it intended to rely on several additional authorities (i.e. Tribunal case law and explanatory notes to heading No. 85.43), and it argued that the Tribunal can take judicial notice of its own decisions and of the law. On February 12, 2021, the Tribunal requested that BBB seek leave to file these additional authorities under section 24.1...

Source: citt_decision (AP-2020-008)

[18]On March 16, 2021, BBB advised that it would, with the CBSA’s consent, add to its argument that the goods in issue do not have a self-contained electric motor as required by heading No. 85.09, and that it would make reference to heading No. 84.14, heading No. 84.15, subheading No. 8414.51, and heading No. 85.01, together with the explanatory notes to the foregoing. The CBSA did not object...

Source: citt_decision (AP-2020-008)

Chapter 84 Notes (11)

1. 1. This Chapter does not cover: • (a) Millstones, grindstones or other articles of Chapter 68; • (b) Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); • (c) Laboratory glassware (heading 70.17); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 70.19 or 70.20); • (d) Articles of heading 73.21 or 73.22 or similar articles of other base metals (Chapters...

2. 2. Subject to the operation of Note 3 to Section XVI and subject to Note 11 to this Chapter, a machine or appliance which answers to a description in one or more of the headings 84.01 to 84.24, or heading 84.86 and at the same time to a description in one or more of the headings 84.25 to 84.80 is to be classified under the appropriate heading of the former group or under heading 84.86, as the case may be, and not the latter group. • (A) heading 84.19 does not, however, cover:...

3. 3. A machine-tool for working any material which answers to a description in heading 84.56 and at the same time to a description in heading 84.57, 84.58, 84.59, 84.60, 84.61, 84.64 or 84.65 is to be classified in heading 84.56.

4. 4. Heading 84.57 applies only to machine-tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: • (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres), • (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or • (c) by the...

5. 5. For the purposes of heading 84.62, a “slitting line” for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A “cut-to-length line” for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear

6. 6.(A) For the purposes of heading 84.71, the expression “automatic data processing machines” means machines capable of: • (i) Storing the processing program or programs and at least the data immediately necessary for the execution of the program; • (ii) Being freely programmed in accordance with the requirements of the user; • (iii) Performing arithmetical computations specified by the user; and, • (iv) Executing, without human intervention, a processing program which requires them to...

7. 7. Heading 84.82 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is less. Other steel balls are to be classified in heading 73.26.

8. 8. A machine which is used for more than one purpose is, for the purpose of classification, to be treated as if its principal purpose were its sole purpose. Subject to Note 2 to this Chapter and Note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 84.79. Heading 84.79 also covers machines for making rope or cable (for...

9. 9. For the purpose of heading 84.70, the term "pocketsize" applies only to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.

10. 10. For the purposes of heading 84.85, the expression “additive manufacturing” (also referred to as 3D printing means the formation of physical objects, based on a digital model, by the successive addition and layering,and consolidation and solidification, of material (for example, metal, plastics or ceramics). Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines answering to the description in heading 84.85 are to be classified in that heading and in no other heading of the...

11. 11.(A) Notes 12 (a) and 12 (b) to Chapter 85 also apply with respect to the expressions “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this Note and in heading 84.86. However, for the purposes of this Note and of heading 84.86, the expression “semiconductor devices” also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this Note and of heading 84.86, the expression "manufacture of flat panel...

Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters.

البنود الفرعية

الملاحظات التفسيرية

هل أنت مستعد للتصنيف بسرعة أكبر؟