관세율표 사전심사 D-메모란다 무역 구제 PGA 요건 제재 체제

Heading 8426

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane.

9 subheadings

소호

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers: - Overhead travelling cranes on fixed support

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers: - Mobile lifting frames on tires and straddle carriers

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers: - Other

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Tower cranes

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Portal or pedestal jib cranes

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Other machinery, self-propelled: - On tires

3 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Other machinery, self-propelled: - Other

2 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Other machinery: - Designed for mounting on road vehicles

1 tariff items

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Other machinery: - Other

1 tariff items

해설 주석

As it is made to lift and move loads, sits on casters and uses forks to lift the load, the product is considered to be a manual forklift truck of heading 84.27. It does not correspond to the definitions of either mobile lifting frames on tires or straddle carriers found in the Explanatory Note to Heading 84.26.

Source: advance_ruling (C-2015-005436)

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Other machinery, self-propelled See the HS Explanatory Note to heading 8426 , ‘self-propelled and other “mobile” machines’, (b), (2). In order to distinguish between the self-propelled machinery of these subheadings, on the one hand, and powered vehicles for special purposes of heading 8705 , on the other hand, the self-propelled machines falling in these subheadings generally have the...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

The second sentence of paragraph 41 should read as follows: “The legal and explanatory notes to Section XVI (where heading No. 84.79 appears) expressly exclude articles of Section XVII (where heading No. 87.05 appears).” Also, paragraph 30 should read “motor vehicle classified under subheading No. 8705.90” and paragraph 49 “motor vehicle under subheading No. 8705.90”. By order of the...

Source: citt_decision (AP-2017-017)

[13]and theExplanatory Notes to the Harmonized Commodity Description and Coding System,

Source: citt_decision (AP-2017-017)

[14]published by the WCO. While the classification opinions and the explanatory notes are not binding, the Tribunal will apply them unless there is a sound reason to do otherwise.

Source: citt_decision (AP-2017-017)

16. The Tribunal must therefore first determine whether the goods can be classified at the heading level according to Rule 1 of theGeneral Rulesas per the terms of the headings and any relative section or chapter notes in theCustoms Tariff, having regard to any relevant classification opinions and explanatory notes. It is only where Rule 1 does not conclusively determine the classification of...

Source: citt_decision (AP-2017-017)

Machines et appareils mécaniques ayant une fonction propre, non dénommés ni compris ailleurs dans le présent Chapitre. -Machines et appareils pour les travaux publics, le bâtiment ou les travaux analogues 19. Note 1 to Section XVI specifically excludes articles of Section XVII from classification in Section XVI: 1. This Section does not cover:...(l) Articles of Section XVII;... 1. This...

Source: citt_decision (AP-2017-017)

(VIII)MOBILE MACHINERYAs regards self-propelled or other mobile machines, reference should be made to the Explanatory Notes to the headings for the machines (e.g., lifting and handling machinery, headings 84.25 to 84.28, and excavating machinery, headings 84.29 and 84.30), and to the Explanatory Notes to the Chapters and headings of Section XVII. (VIII)MOBILE MACHINERY As regards...

Source: citt_decision (AP-2017-017)

[20]On the basis of these definitions, it submits that the goods in issue are trucks because they are a motor vehicle powered by an engine, used for a purpose, namely, to gather, carry and dispose of refuse. 34. The CBSA argues that the goods in issue also meet the requirements found in the explanatory notes to heading No. 87.05, which require that the goods must form a “complete motor...

Source: citt_decision (AP-2017-017)

Chapter 84 Notes (11)

1. 1. This Chapter does not cover: • (a) Millstones, grindstones or other articles of Chapter 68; • (b) Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); • (c) Laboratory glassware (heading 70.17); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 70.19 or 70.20); • (d) Articles of heading 73.21 or 73.22 or similar articles of other base metals (Chapters...

2. 2. Subject to the operation of Note 3 to Section XVI and subject to Note 11 to this Chapter, a machine or appliance which answers to a description in one or more of the headings 84.01 to 84.24, or heading 84.86 and at the same time to a description in one or more of the headings 84.25 to 84.80 is to be classified under the appropriate heading of the former group or under heading 84.86, as the case may be, and not the latter group. • (A) heading 84.19 does not, however, cover:...

3. 3. A machine-tool for working any material which answers to a description in heading 84.56 and at the same time to a description in heading 84.57, 84.58, 84.59, 84.60, 84.61, 84.64 or 84.65 is to be classified in heading 84.56.

4. 4. Heading 84.57 applies only to machine-tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: • (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres), • (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or • (c) by the...

5. 5. For the purposes of heading 84.62, a “slitting line” for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A “cut-to-length line” for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear

6. 6.(A) For the purposes of heading 84.71, the expression “automatic data processing machines” means machines capable of: • (i) Storing the processing program or programs and at least the data immediately necessary for the execution of the program; • (ii) Being freely programmed in accordance with the requirements of the user; • (iii) Performing arithmetical computations specified by the user; and, • (iv) Executing, without human intervention, a processing program which requires them to...

7. 7. Heading 84.82 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is less. Other steel balls are to be classified in heading 73.26.

8. 8. A machine which is used for more than one purpose is, for the purpose of classification, to be treated as if its principal purpose were its sole purpose. Subject to Note 2 to this Chapter and Note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 84.79. Heading 84.79 also covers machines for making rope or cable (for...

9. 9. For the purpose of heading 84.70, the term "pocketsize" applies only to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.

10. 10. For the purposes of heading 84.85, the expression “additive manufacturing” (also referred to as 3D printing means the formation of physical objects, based on a digital model, by the successive addition and layering,and consolidation and solidification, of material (for example, metal, plastics or ceramics). Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines answering to the description in heading 84.85 are to be classified in that heading and in no other heading of the...

11. 11.(A) Notes 12 (a) and 12 (b) to Chapter 85 also apply with respect to the expressions “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this Note and in heading 84.86. However, for the purposes of this Note and of heading 84.86, the expression “semiconductor devices” also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this Note and of heading 84.86, the expression "manufacture of flat panel...

더 빠르게 분류할 준비가 되셨나요?

CustomsLogIQ는 이 관세 데이터를 AI 품목분류에 활용합니다. 무료로 체험해 보세요.

CustomsLogIQ 무료 체험