Arancel Resoluciones D-Memoranda Medidas comerciales Requisitos OGA Regímenes de sanciones

Heading 8483

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints).

7 subheadings

Subpartidas

8483.10

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks

6 tariff items
8483.20

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Bearing housings, incorporating ball or roller bearings

2 tariff items
8483.30

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Bearing housings, not incorporating ball or roller bearings; plain shaft bearings

6 tariff items
8483.40

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters

7 tariff items
8483.50

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Flywheels and pulleys, including pulley blocks

2 tariff items
8483.60

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Clutches and shaft couplings (including universal joints)

2 tariff items
8483.90

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Toothed wheels, chain sprockets and other transmission elements presented separately; parts

6 tariff items

Resoluciones anticipadas relacionadas

C-2015-006297

&&The Pulley Tire is a round wheel-like object made of E-coated steel approximately 3 inches in diameter with a grooved inner rim. This product is a...

HS 8483.50.00.90
8000012294

&&The Go-Lift Hub Gear 151222-147, the Go-Lift Idler Gear 151229-148 and the Go-Lift Motor Gear...

HS 8483.90.00.20

Notas explicativas

In your application for an advance ruling, you suggested tariff classification number 8483.30.00.29. This tariff classification number is incorrect. The bearings and cushions are designated under the terms of heading 84.83. The Explanatory Notes to heading 84.83 specify that transmission components of the kind described under this heading, other than components constituting integral parts of...

Source: advance_ruling (8000005134)

gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). Consideration is given to the Explanatory Notes to heading 84.83 which state, in pertinent part: (G) PULLEYS, INCLUDING PULLEY BLOCKS Pulleys consist of wheels, sometimes with a grooved rim, which transmit rotary movement...

Source: advance_ruling (C-2015-006297)

Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

Flywheels and pulleys, including pulley blocks This subheading includes track idler wheels made of base metals, designed to be used in tracked earthmoving machines for guiding and sliding the track. These articles are considered as free pulleys. They do not transmit any power themselves, but maintain the tension of the track, transmit rotary movement, and as such act as a guide (see the HSEN...

Source: eu_cn_en (EUR-Lex 02019XC0329(02)-20250113)

(A) Subject to certainexclusionsprovided for in the Notes to this Section and to Chapters 84 and 85 and apart from goods covered more specifically in other Sections, this Section covers all mechanical or electrical machinery, plant, equipment, apparatus and appliances and parts thereof, together with certain apparatus and plant which is neither mechanical nor electrical (such as boilers and...

Source: citt_decision (AP-2009-005)

This heading covers all ball, roller or needle roller type bearings. They are used in place of smooth metal bearings and enable friction to be considerably reduced. They are generally fitted between the bearing housing and the shaft or axle, and may be designed to give radial support (radial bearings) or to resist thrust (thrust bearings). Certain bearings may be designed for both radial and...

Source: citt_decision (AP-2009-005)

Chapter 84 Notes (11)
1. 1. This Chapter does not cover: • (a) Millstones, grindstones or other articles of Chapter 68; • (b) Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); • (c) Laboratory glassware (heading 70.17); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 70.19 or 70.20); • (d) Articles of heading 73.21 or 73.22 or similar articles of other base metals (Chapters...
2. 2. Subject to the operation of Note 3 to Section XVI and subject to Note 11 to this Chapter, a machine or appliance which answers to a description in one or more of the headings 84.01 to 84.24, or heading 84.86 and at the same time to a description in one or more of the headings 84.25 to 84.80 is to be classified under the appropriate heading of the former group or under heading 84.86, as the case may be, and not the latter group. • (A) heading 84.19 does not, however, cover:...
3. 3. A machine-tool for working any material which answers to a description in heading 84.56 and at the same time to a description in heading 84.57, 84.58, 84.59, 84.60, 84.61, 84.64 or 84.65 is to be classified in heading 84.56.
4. 4. Heading 84.57 applies only to machine-tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: • (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres), • (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or • (c) by the...
5. 5. For the purposes of heading 84.62, a “slitting line” for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A “cut-to-length line” for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear
6. 6.(A) For the purposes of heading 84.71, the expression “automatic data processing machines” means machines capable of: • (i) Storing the processing program or programs and at least the data immediately necessary for the execution of the program; • (ii) Being freely programmed in accordance with the requirements of the user; • (iii) Performing arithmetical computations specified by the user; and, • (iv) Executing, without human intervention, a processing program which requires them to...
7. 7. Heading 84.82 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is less. Other steel balls are to be classified in heading 73.26.
8. 8. A machine which is used for more than one purpose is, for the purpose of classification, to be treated as if its principal purpose were its sole purpose. Subject to Note 2 to this Chapter and Note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 84.79. Heading 84.79 also covers machines for making rope or cable (for...
9. 9. For the purpose of heading 84.70, the term "pocketsize" applies only to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.
10. 10. For the purposes of heading 84.85, the expression “additive manufacturing” (also referred to as 3D printing means the formation of physical objects, based on a digital model, by the successive addition and layering,and consolidation and solidification, of material (for example, metal, plastics or ceramics). Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines answering to the description in heading 84.85 are to be classified in that heading and in no other heading of the...
11. 11.(A) Notes 12 (a) and 12 (b) to Chapter 85 also apply with respect to the expressions “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this Note and in heading 84.86. However, for the purposes of this Note and of heading 84.86, the expression “semiconductor devices” also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this Note and of heading 84.86, the expression "manufacture of flat panel...

¿Listo para clasificar más rápido?

CustomsLogIQ utiliza estos datos arancelarios para potenciar la clasificación con IA. Pruébelo gratis.

Pruebe CustomsLogIQ gratis