Heading 9110

Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements.

4 subheadings

উপশিরোনামসমূহ

Of watches: - Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements.

1 tariff items

9110.12

Of watches: - Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements.

1 tariff items

9110.19

Of watches: - Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements.

1 tariff items

9110.90

Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements.

1 tariff items

Chapter 91 Notes (4)

1. 1. This Chapter does not cover: • (a) Clock or watch glasses or weights (classified according to their constituent material); • (b) Watch chains (heading 71.13 or 71.17, as the case may be); • (c) Parts of general use defined in Note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39) or of precious metal or metal clad with precious metal (generally heading 71.15); clock or watch springs are, however, to be classified as clock or watch parts (heading...

2. 2. Heading 91.01 covers only watches with case wholly of precious metal or of metal clad with precious metal, or of the same materials combined with natural or cultured pearls, or precious or semi-precious stones (natural, synthetic or reconstructed) of headings 71.01 to 71.04. Watches with case of base metal inlaid with precious metal fall in heading 91.02.

3. 3. For the purpose of this Chapter, the expression "watch movements" means devices regulated by a balance-wheel and hairspring, quartz crystal or any other system capable of determining intervals of time, with a display or a system to which a mechanical display can be incorporated. Such watch movements shall not exceed 12 mm in thickness and 50 mm in width, length or diameter.

4. 4. Except as provided in Note 1, movements and other parts suitable for use both in clocks or watches and in other articles (for example, precision instruments) are to be classified in this Chapter.

দ্রুত শ্রেণিবিন্যাস করতে প্রস্তুত?

CustomsLogIQ এই শুল্ক তথ্য ব্যবহার করে AI শ্রেণিবিন্যাস পরিচালনা করে। বিনামূল্যে ব্যবহার করুন।

CustomsLogIQ বিনামূল্যে ব্যবহার করুন