&&This product is a cantilever jacking and stand system which will be built under and into the floor of a railcar maintenance garage. The lifting beams are lowered or raised by threaded steel spindles operated by electrical motors and the system is controlled by a motor control console. In the lowered position, a railcar is rolled into place over cantilevered lifting heads whereby it is jacked to a desired height. Body stands are positioned to support the car body, permitting the trucks (bogies) to be separated and lowered from the body for undercarriage work to be performed.&&The system consists of 3 car hoists and 6 pairs of body supports in a shallow pit design. The pit depth is between 42" to 48" and the caissons tubes have a diameter of 26" to 36". The lifting capacity of the car hoist is 33 tons with a total lifting power for the 3 car hoists being 99 tons (to lift the complete railcar). The rail crossover capacity is 33 tons, with an axle load of 16.5 tons, 2 axles per truck. The lifting/lowering speed is approximately 17"min ± 10%.&&